GTS Transfer Switch

Generac GTS transfer switches feature status lights that indicate switch position and source status, a programmable weekly exerciser, independent voltage pickup and dropout adjustments and utility monitoring to protect against utility phase loss conditions. Our front access test mode switch allows the entire standby system to be tested in either a normal or fast test mode. The GTS transfer Switch is available in different amps from 100 up to 2600.


Product snapshot

100 – 2600 Amp
Open with Time Delay Neutral or In-Phase Transfer
2, 3, 4 Pole
NEMA 1, 12, 3R, 4 & 4X
UL1008 and CSA
Two Wire Start – Any Generator Controller

Product description

Standard time delay neutral will reduce switchover problems.
Logic control with in phase monitor regulates switch functions and allows adjustable switch settings with LED indicators.
Control switches located on the front of the door for ease of operation. • All switches are UL 1008 listed and CSA certified.
Electrically-operated, mechanically-held and interlocked main contacts with break before make design for fast, positive connections.
Rated for all classes of load, 100% equipment rated, both inductive and resistive with
no derations.
2, 3, and 4 Pole 600 VAC contactors.
160 millisecond transfer time.

Standard Features

Single coil design, electrically operated and mechanically held • Programmable exerciser
SPDT auxiliary contacts
Main contacts are silver alloy to resist welding and sticking
Conformal coating protects all printed circuit boards
Indicating LED’s for switch position—Normal, Emergency, and Standby Operating • NEMA 1 enclosure with hinged door and key-locking handle
Three-position switch—Fast Test, Auto, Normal Test
Arc chutes on main contacts